The CPX400 Series - Single and Dual output PowerFlex Laboratory DC Power Supplies - 420 or 840 watts

When in manual operation mode, the CPX400 Series has an OVP control that is set from the front panel (individually set per output on dual output models).

In bus controlled mode (CPX400SP and CPX400DP only), this is replaced by a bus programmable OVP protection that can be set in 0.1V increments.

The over-current trip is available only on the CPX400SP and CPX400DP models and is only active when in bus controlled mode.  OCP can be set in increments of 10mA.